Do you have a clogged toilet and are worried about how to unclog it? It is not unusual to have a blocked toilet, which can happen anytime. Getting a plumber around can be challenging, but no worries because there are several ways to fix this on your own.
When your toilet gets clogged, the first thing that comes to mind is a plunger or plumber, right? But what if you don’t have either of these options available? Here are four easy methods to help you unblock your toilet if you don’t have access to a plunger.
- Hot Water and Dish Soap
Most toilet blockage results from something getting stuck. One of the easy methods to fix this is making use of hot water and dish soap.
First, drain the water from the toilet bowl. Next, pour a sizable quantity of soap down the drain. The soap is to lubricate anything that might be stuck and aid in the breakdown of the residue.
After 15-20 minutes, pour a saucepan of hot water down the toilet bowl with the soap still in it. The blockage will be flushed out as a result. Be mindful not to use boiling water as it could damage the toilet.
- Use Baking Soda and Vinegar
This method is similar to hot water and washing detergent with the added benefit of bubbles which aid in clearing up the excess debris. In this method, the temperature of the water is important. Make sure the water is hot enough before adding soda and vinegar.
Start by removing as much water as possible from the toilet using a bowl or cup. After that, pour approximately 1/4 cup baking soda down the toilet drain. Follow it up with two cups of vinegar. Afterward, flush with a bucket of hot water after letting everything sit for 30 to 40 minutes.
- Use Cloth Hanger
You can design your drain snake out of a wire coat hanger from your wardrobe if you don’t have access to one. Carefully unwind the hanger so that it is straight all the way through, excluding the hook. Then, gently slant the hanger down the toilet while wearing rubber gloves until you reach the blockage. Before doing this, wrap a small piece of cloth around the hook to prevent scratches or other damage to the porcelain. Flush the toilet a few times to empty it after the water drains.
- Use a Toilet Brush
A plunger is usually the go-to fix in the case of a clogged toilet. However, you should consider a toilet brush if a plunger is unavailable. If you have tried using every approach and it does not work out, you should consider this method. All you have to do is slant it into the drain. Then use a plunger-style pump to operate it. Sometimes the force of the pressure can dislodge what is causing the blockage.
While you might want to try the DIY style when your toilet it clogged, sometimes the solution could be beyond what you can handle. In this event, you might want to seek the help of a plumber Cronulla.